Fuel economy-maximizing behaviors or more popularly known as gas saving tips have been at the forefront of most drivers’ concerns thanks to the looming oil crisis. Basically, it is defined as a set of methods that drivers can utilize, in order to optimize their automobile’s fuel economy. There are many ways that energy is spent needlessly through driving. These include inefficient engine use, aerodynamic drag, friction, excessive braking, and many more. However, there are two general categories on how to save gas, which can be either basic or advanced. The former can be done by most drivers with little or no professional help, while the latter ought to be done by an experienced hypermiler.
Basic Techniques
The first thing that every driver should do in order to improve gas mileage is to inflate the tires to the maximum. This way, a smaller amount of energy is needed to move the automobile. In line with this, there should be minimum cargo as much as possible to remove the burden off the engine. Additionally, maintaining optimum speed should help significantly, which is usually measured in the 35 to 55 mph range. Aside from that, the driver should also pay attention to braking and acceleration. That means braking and acceleration should not be sudden and they should be minimized as much as possible. Another way to save gas is through coasting. That means the engine is still running, although the transmission is set to neutral. Bear in mind that fuel is still consumed when coasting, although far less than the driver would in normal driving conditions. These basic techniques are recommended for the average user and these are also far simpler to execute as opposed to the advanced techniques that are discussed below.
Advanced
Pulse and glide is one of the most commonly used fuel saving tips by the advanced hypermiler. This method consists of driving to a certain speed limit called pulsing, which is then followed by a period of gliding. These two steps are repeated in order to maximize fuel economy. However, it is advised that the gliding stage should be done when the engine is not activated. Another sophisticated fuel saving tip is called drafting, which is otherwise known as slipstreaming. This technique involves two or more vehicles that are aligned in a close group, in order to decrease the overall effect of drag. This happens because the lead vehicle’s slipstream is utilized by the ones that follow it. Drafting is an effective way to increase gas mileage both for the lead and tail automobiles. Most hypermilers use this method when trailing larger vehicles and has was shown to increase Miles Per Gallon(MPG) efficiency by at least 11 percent.
Overall, it is imperative for each driver to learn different ways on saving gas without having to spend on another part or accessory to accomplish it. However, enough caution ought to be considered whenever these techniques are used to prevent accidents or costly engine damage.
Source: http://www.ArticlePros.com/author.php?Martiana Cruz
|
