Fuses and Circuit Breakers

<h1>Fuses and Circuit Breakers</h1>

<p align=right>by Jim Johnson</p>

<div align=justify>If you have an older home you may have a fuse panel. Most homes these days have circuit breaker panels. Both serve the same purpose; to protect the branch circuits from overloads and to trip in the event of a sustained short circuit. Some common fuse and circuit breaker sizes you'd find in your home are 15 amp, 20 amp, 30 amp, and 40 amp. Generally speaking a 15 or 20 amp circuit breaker protects your normal branch circuits containing lights and receptacles.  Clothes dryers are normally protected by 30 amp breakers while ranges are protected by 40 amp breakers.

You will find that older homes have few branch circuits where everything seems to run off of one or two fuses which creates the problem of tripped breakers or blown fuses. You may think that the solution to this would be to simply install a larger circuit breaker or fuse. This can create dangerous overloading of branch circuit conductors. Conductors are rated by how much continous current they can safely carry.  A #12 cable can carry up to 20 amps while a #14 cable can carry 15 amps. By installing a 30 amp breaker or fuse on a 15 or 20 amp branch circuit you will be exceeding the rating of the cable.

When a cable is asked to carry more current than it is rated for, a dangerous situation develops. The larger a cable is the less resistance it has and the more current it can handle. The smaller a cable is the less current it can handle. You can use the garden hose analogy - the larger the diameter the less resistance and the more water it can carry. When overloaded, the conductors will heat up which can melt the insulation on the cable and cause a short circuit or an electrical fire.  The correct way to resolve a situation where fuses and breakers frequently trip is to install more circuits and break up overloaded circuits.

These days houses are wired much differently with circuit breaker panels housing 32 to 40 branch circuits. The big advantage of circuit breakers is that they can be reset where fuses have only one life. To reset a circuit breaker first turn it all the way off and then you can switch it back to the on position. When a fuse blows you have to replace it.  It's a good idea if your home has a fusebox to keep 1 or 2 spares of each size fuse right beside the fuse panel so that you can find them easily when needed. It is highly recommended that you replace your old fuse panel with a circuit breaker panel.  A qualified electrician and an electrical permit will be required for this.

If you happen to sell your house, one of the main concerns a prospective buyer, or home inspector, has is the electrical wiring and breaker panel. Old overloaded fuse panels will definitely be a major issue. Replacing your fuse panel and updating any unsafe wiring will go a long way when and if you decide to put your home on the market.

You may reprint this article on your website provided the content is not modified and the resource box below with live link is retained.</div>

<p align=center>Article source: <a href="http://www.ArticlePros.com/home_care/repair/article-34930.html">ArticlePros.com</a></p>
 
<table align=center width=550 cellspacing=1 bgcolor=silver cellpadding=5>
<tr bgcolor=antiquewhite>
	<td>
		<p align=center><b>About the author</b></p>
		<p align=justify><br />
For more Home and Garden DIY articles visit http://www.HomeandGardenAdvice.com<br />
</p>
		<p align=left><a href="http://www.homeandgardenadvice.com" target="_blank" title="will open in new window" class=blue>http://www.homeandgardenadvice.com</a></p>				<p align=center><input type=button class=asubm value="Other articles by Jim Johnson" onclick="document.location='http://www.ArticlePros.com/author.php?Jim Johnson'" style="height:20px;cursor:hand"></p>
	</td>
</tr>
</table>